 |
The following features are included in the Release 2.12.0.
- EDID Editor now supports creating/modifying lipsync information
in the vendor specific data block.
The following anomalies have been corrected in the Release
2.12.0.
- Emulate Mode sets color space and sync type based on the
interface and format selected. Enabling this mode will make
the generator behave in the same way as release 2.4, whereas
disabling this mode will make the generator behave in the
same way as release 2.5.4 and later. Detailed information
can be found in Chapter 2 of the user guide.
- CEC end of message testing can now be correctly performed
as described in Chapter 11 of the user guide.
- EDID Editor can now correctly calculate the checksum when
you load an XML file that you have saved previously.
- You can now ImageShift custom images without having to
load and use them at least once.
- MAC address information in the GenStats image/report now
shows the correct address in use.
- Default bootline user and password are now set to "anonymous"
and "user" respectively.
Note: The release files can only be applied
to the 882E/881E generator (not the 882CA/882C/881C, 882D, nor
882EA generators).
The Release 2.12.0 is comprised of the following software components.
| Software Component |
Version |
Change Status |
| Boot Rom |
01.04.11 |
no change |
| vxWorks |
20.1885000 |
new with 2.12.0 |
| Gateware 1 |
404C,1029,7252007 |
no change |
| Gateware 2 |
401A,8,1082007 |
no change |
| Gateware 3 |
401B,1,8082007 |
no change |
Java JRE required |
1.5.06 |
no change |
You can upgrade your generator using the procedures in the Users
Guide. Please note that you will have to verify that your
current generator is operating with Release 2.7.0, 2.8.0,
2.8.1, 2.8.2, 2.9.0, 2.10.2, 2.10.5, or 2.11.0. To verify
that your current generator is operating with one of these
releases, enter the following command:
verf?
Release 2.7.0 should return the following information:
20.1883800, 01.04.11
Release 2.8.0 should return the following information:
20.1884000, 01.04.11
Release 2.8.1 should return the following information:
20.1884200, 01.04.11
Release 2.8.2 should return the following information:
20.1884202, 01.04.11
Release 2.9.0 should return the following information:
20.1884400, 01.04.11
Release 2.10.2 should return the following information:
20.1884602, 01.04.11
Release 2.10.5 should return the following information:
20.1884605, 01.04.11
Release 2.11.0 should return the following information:
20.1884800, 01.04.11
After verifying that the generator is operating with Release
2.7.0, 2.8.0, 2.8.1, 2.8.2, 2.9.0, 2.10.2, 2.10.5, or 2.11.0,
upgrade your generator using the procedures below:
- Download the 2.12.0 Zip file to your PC and unzip the
file. There will be a System and a Library directory.
- Upgrade the generator using the procedures at this link.
- After power cycling the generator, verify that the generator
is running the current 2.12.0 version of the vxWorks file
by entering the following command:
verf?
20.1885000, 01.04.11
- Verify that the vxWorks file is: 20.1885000.
- Verify that the BootRom version is: 01.04.11.
- Verify that the generator is running the current 2.12.0
version of the gateware files by entering the following
command:
verg?
404C,1029,7252007:401A,8,1082007:401B,1,8082007
- The first listing is the Lattice FPGA gateware. The next
two listings are the transmitter gateware files for the
DVI and the HDMI output. The gatewares are separated by
colons. Verify that the transmitter gateware files are:
401A,8,1082007:401B,1,8082007.
You can obtain Release Notes for past releases as follows:
88xE Release 2.11.0
88xE Release 2.10.5
88xE Release 2.10.2
88xE Release 2.9.0
88xE Release 2.8.2
88xE Release 2.8.1
88xE Release 2.8.0
88xE Release 2.7.0
|
|
