The following features are included in the Release 2.6.0.

• ITE now has a graphical user interface
• CEC updates in accordance with HDMI 1.3A; updated ACA
• Added special box image
• Support for hot plug detect de-assertion length control with HPPW command


• Support for reformatting Flashmem to resolve file corruption


• IP address can now be set through command line with ENET:IP and ENET:MASK commands

The following anomalies have been corrected in the Release 2.6.0.

• Analyzer now correctly represents values for both fields of an interlaced source


• Corrected image shift anomaly on CVBS interface


• Read EDID function in HDMI-H now includes DMT0660 (VIC 1)


• Set_AVMute bit is now set during format parameter changes


• Miscellaneous EDID Editor bug fixes


• FTP Browser now works on non-Windows PCs

The Release 2.6.0 is comprised of the following software components.

The following anomalies have been reported with Releases 2.5.x and 2.6.0.

• When AVST or DVST is changed through the command line, the generator's front panel doesn't reflect the change (i.e. the asterisk next to YYY/RGB/YPbPr doesn't get changed). This problem is prevalent on both analog or digital interface.
• Sync setting does not automatically switch to default setting for a particular format and interface. For example if you have selected the VGA interface and are using the DMT0660 format which has DSS sync (and DSS was in fact set) and then you selected 720p60, the sync type is not changing to ACS as it should be for 720p60.

You can upgrade your generator using the procedures in the Users Guide. Please note that you will have to verify that your current generator is operating with Release 2.1.x, 2.2.x, 2.3.x, 2.4.x or 2.5.x. To verify that your current generator is operating with one of these releases, enter the following command:

verf?

Release 2.1.0 should return the following information:

20.1882508, 01.04.11

Release 2.2.0 should return the following information:

20.1882800, 01.04.11

Release 2.2.1 should return the following information:

20.1882901, 01.04.11

Release 2.2.2 should return the following information:

20.1882903, 01.04.11

Release 2.2.3 should return the following information:

20.1882910, 01.04.11

Release 2.3.0 should return the following information:

20.1883000, 01.04.11

Release 2.4.0 should return the following information:

20.1883200, 01.04.11

Release 2.5.5 should return the following information:

20.1883405, 01.04.11

After verifying that the generator is operating with either Release 2.1.x, 2.2.x, 2.3.x, 2.4.x or 2.5.x you can upgrade to Release 2.6.0 by completing the following high level steps which are detailed in the Users Guide:

1. Download the 2.6.0 Zip file to your PC and unzip the file.
2. Back up the existing System and Library directories from the generator's flash memory to your PC: Back up files.
3. Transfer the 2.6.0 System and Library directories to your generator's flash memory: Transfer files. Transfer the System directory first.
4. Configure the generator to boot from the generator's flash memory: Boot from flash
5. Power cycle the generator.
6. Verify that the generator is running the current 2.6.0 version of the vxWorks file by entering the following command:
   
   verf?
   20.1883600, 01.04.11



7. Verify that the vxWorks file is: 20.1883600.
8. Verify that the BootRom version is: 01.04.11.
9. Verify that the generator is running the current 2.6.0 version of the gateware files by entering the following command:
   
   verg?
   256C,39,2222006:253F,77,8012006:253A,9,8282006



10. The first listing is the CPLD gateware. The next two listings are the Tx and Rx gateware respectively. The gatewares are separated by colons. Verify that the Tx gateware file (the second item listed) is: 253F,77,8012006.
11. Verify that the Rx gateware file (the third item listed) is: 253A,9,8282006.