Solutions

Home » Solutions

Teledyne LeCroy provides test instruments that help manufacturers bring next-generation video, audio, and control products to market – faster and without interoperability problems. The quantumdata series products support a variety of test solutions including functional testing for developers in R&D labs, compliance solutions for developers and test engineers, verification and diagnostic testing for professional A/V integrators and installers and fault testing on production lines in manufacturing facilities.

R&D

Compliance

Installation

Manufacturing

Military

Broadcast

The Teledyne LeCroy quantumdata family of products provide a variety of solutions for testing in the R&D development lab environment. R&D testing entails emulation of reference video source (transmitter) and sink (receiver) devices in order to conduct functional testing and interoperability testing of source and sink devices in order to detect and diagnosing potential problems between A/V devices. The following products support functional testing and interoperability testing in the R&D environment. Visit the R&D Solutions page for more detailed information.

  • 980 HDMI Protocol Analyzer module. The 980 HDMI Protocol Analyzer module supports deep analysis of HDMI and MHL streams as well as HDMI and MHL compliance testing for source, sink, repeater/dongle devices. For HDMI the tool provides full visibility into the HDMI protocol, timing, control and auxiliary data up to 300MHz (HDMI) which supports testing of HDMI 2.0 4K Ultra HD sources at 50/60Hz using 4:2:0 pixel encoding. For MHL the module supports analysis of MHL 1.2, 1.3, 1.4, 2.0, 2.1 and 2.2 source devices.
  • 980 HDMI 2.0 Video Generator module. The 980 HDMI 2.0 Video Generator module supports video and audio functional testing of HDMI 2.0 sink devices at TMDS characters rates up to 600MHz for testing ultra high definition HDTVs with 4K x 2K resolutions running at 50/60Hz. The 980 HDMI 2.0 Video Generator module also supports HDMI Forum-approved compliance testing for HDMI 2.0 sink tests at pixel rates up to 600MHz.
  • 980 HDMI 2.0 Protocol Analyzer module. The 980 HDMI 2.0 Protocol Analyzer module supports deep analysis and compliance testing of HDMI 2.0 streams up to 600MHz. The module also supports HDMI 2.0 compliance testing for source devices. For HDMI the tool provides full visibility into the HDMI metadata, timing data, video data, control and auxiliary data up to 600MHz (HDMI) which supports testing of HDMI 2.0 4K Ultra HD sources at 50/60Hz.
  • 980 HDMI 2.0 Protocol Analyzer / Generator module. The 980 HDMI 2.0 Protocol Analyzer / Generator module supports deep analysis and compliance testing of HDMI 2.0 streams up to 600MHz. The module also supports HDMI 2.0 compliance testing for source devices and UHD Alliance compliance testing for ultra high definition sources. For HDMI the tool provides full visibility into the HDMI metadata, timing data, video data, control and auxiliary data up to 600MHz (HDMI) which supports testing of HDMI 2.0 4K Ultra HD sources at 50/60Hz. The module is also equipped with an HDMI 2.0 transmitter port for testing sink devices. Currently the transmitter port offers pass-through monitoring of an HDMI 2.0 video stream between a source and sink, pixel error testing of cables and distribution gear or entire distribution networks in loopback mode and capture and playback where an input stream can be captured, stored and then played back.
  • 980 HDMI Video Generator module. The 980 HDMI Video Generator module supports video and audio functional testing at data rates up to 300MHz for testing 4K Ultra HD TVs at 50/60Hz. The module features two (2) HDMI outputs—both active simultaneously—for testing HDTVs with multiple HDMI inputs. The module also optionally supports analysis functions for testing source devices such as basic video analysis. The module now supports HDMI 2.0 test features for 1) 4K Ultra HD TVs at 50/60Hz using 4:2:0 pixel encoding, 2) 21:9 formats up to 300MHz and reading and 3) displaying EDIDs with HDMI 2.0 capabilities.
  • 980 DP Video Generator / Analyzer module. The 980 DP1.2 Video Generator / Analyzer module supports video, audio and protocol functional testing high-end DP 1.2 displays. The module supports HBR2 data rates including 1.63, 2.70 & 5.40 Gbps on 1, 2 & 4 lanes on both its Tx ports and its Rx port. The module features two DisplayPort 1.2 outputs—both active simultaneously—for testing displays with multiple DisplayPort inputs. The 980 DP1.2 Video Generator / Analyzer module is equipped with all the standard video timings and test patterns necessary for testing modern displays. The module's Tx ports support a variety of protocol functions tests on display devices such as EDID verification, DPCD decode, Link Training control and HDPC 1.3 and 2.2. You can monitor the Aux Channel transactions on both the Tx ports. The DP 1.2 module’s optional Rx analyzer port emulates a DisplayPort 1.2 display device including EDID, DPCD and HDCP (1.3 & 2.2) emulation, Rx Link Training function and MST Rx function.
  • 980 SDI Video Generator module. The 980 SDI Video Generator module supports video and audio functional testing of next gen broadcast monitors and conversion devices up to 12G-SDI. The module is equipped with four (4) 12G-SDI-capable output ports. The output ports can aggregated for Dual link HD-SDI and Quad link 3G-SDI operation. A gen-lock input supporting both SD analog black burst and HD tri-level to sync the output clocks with a "house sync." The module provides a programmable audio sine wave generator supporting 2 channel through 12 channel LPCM audio.
  • 780 series handheld test instruments. The 780 series handheld test instruments for HDMI® are battery-powered (except 780C, 780D and 780E), portable video and audio generators and HDMI analyzers that enable you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780 series instruments are equipped with both a reference HDMI source and a reference HDMI sink interface allowing you to test audio, video and HDMI protocols—HDCP, EDID, CEC & infoframes—of any type of HDMI device: sources, repeaters and sinks. Newer models support other digital interfaces such as HDBaseT, 3G-SDI and DisplayPort.
  • 804 series Video Generators. The rack mountable model 804, 804A and 804B Video Generators are optimized for testing modern HDMI flat panel TVs in an R&D environment or in manufacturing production lines. The 804 video test generator supports testing of HDMI resolutions operating up to 225 MHz. The 804A Video Generator supports testing of HDMI 4K x 2K resolutions up to pixel rates of 300 MHz. The 804B video test generator supports testing of HDMI 4K x 2K resolutions up to pixel rates of 600 MHz.
  • 882 series Multimedia Test Instruments. The 882 series Multimedia Test Instruments support a wide range of functional tests for engineers in R&D lab environments. The 882 series offers features for functional testing HDMI 1.3, DisplayPort 1.1, DVI and RGB analog and component analog displays. The 882 series also offers analyzers for functional testing of HDMI 1.3 and DisplayPort 1.1 sources in.

The Teledyne LeCroy quantumdata family of products support compliance testing for HDMI, MHL, HDBaseT, DisplayPort as well as HDCP compliance. The following is a summary of products that provide compliance test solutions for various technologies. Visit the Compliance Test Solutions Page for more detailed information.

  • 980 HDMI Protocol Analyzer module. The 980 HDMI Protocol Analyzer modules supports compliance testing for HDMI 1.4b and 2.0 sources and sinks and MHL 1.2, 1.3, 2.0 & 2.1 sources, sinks and MHL dongles. The Protocol Analyzer module also supports HDCP 1.4 and HDCP 2.2 compliance testing for HDMI devices. The HDMI Protocol Analyzer module can be equipped in any of the 980 series Advanced Test Platforms.
  • 980 HDMI 2.0 Video Generator module. The 980 HDMI 2.0 Video Generator supports functional testing and HDMI-Forum approved compliance testing for HDMI 2.0 HDTVs above 300 MHz up to 600 MHz. The module can be equipped in the 980B and 980R series Advanced Test Platforms.
  • 980 HDMI 2.0 Protocol Analyzer module. Provides deep visibility through capture/store, real time monitoring of incoming HDMI 2.0 (and HDMI 1.4) video up to 600 MHz. The module also supports HDMI 2.0 compliance testing for source devices and UHD Alliance compliance testing for ultra high definition sources. The HDMI 2.0 Protocol Analyzer module can be equipped in the 980B and 980R series Advanced Test Platforms.
  • 980 HDMI 2.0 Protocol Analyzer / Generator module. The 980 HDMI 2.0 Protocol Analyzer / Generator module supports deep analysis and compliance testing of HDMI 2.0 streams up to 600MHz. The module also supports HDMI 2.0 compliance testing for source devices and UHD Alliance compliance testing for ultra high definition sources. The HDMI 2.0 Protocol Analyzer module can be equipped in the 980B and 980R series Advanced Test Platforms.
  • 980 HDMI Phy and Aux Channel Analyzer module. The 980 HDMI Phy & Protocol Aux Channel Analyzer module supports compliance testing of the HDMI DDC bus and HDMI 2.0 CEC testing. The module’s CEC compliance tests enable you to identify compliance failures early in the development cycle. The solution is ideal for pre-testing and self-testing (where permitted) your HDMI 2.0 device. The module also supports compliance testing of the HDMI DDC bus voltage and timing parameters in accordance with the HDMI 1.4b Clarification Version 1.04, May 1, 2014.
  • 882EA-HDMI Multimedia Test Instrument. The 882EA-HDMI Multimedia Test Instrument provides two (2) HDMI transmit (Output) ports and two (2) HDMI receive (Input) ports for testing both HDMI sources, sinks and repeater devices. The 882EA-HDMI instrument can optionally support industry approved HDMI CEC and HDCP 1.4 compliance test.
  • 882EA-DP Multimedia Test Instrument. The 882EA-DP Multimedia Test Instrument provides two (2) DisplayPort transmit (Output) ports and two (2) DisplayPort receive (Input) ports for testing both DP source and sink devices. The 882EA-DP instrument can optionally support industry approved DisplayPort Link Layer testing as well as HDCP 1.4 compliance test for DisplayPort sink devices.
  •  

Teledyne LeCroy quantumdata family of products provide installers with the necessary tools to install and verify HDMI, HDBaseT and SDI commercial and residential installations. The following products support installation verification in the field. Visit the Installation Test Solutions Page for more detailed information.

  • 780 Handheld Test Instrument. The 780 handheld test instrument for HDMI® is a battery-powered, portable video and audio generator and HDMI analyzer that enables you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780 instrument is equipped with both a reference HDMI source and a reference HDMI sink interface allowing you to test audio, video and HDMI protocols—HDCP, EDID, CEC & infoframes—of any type of HDMI device: sources, repeaters and sinks. The 780 supports HDMI testing at pixel rates up to 165MHz and TMDS rates up to 225MHz for deep color on the output and pixel rates up to 150MHz on the HDMI input.
  • 780AH Handheld Test Instrument. The 780AH Handheld Test Instrument is a battery-powered, portable video and audio generator and HDMI analyzer that enables you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780AH instrument is equipped with both a reference HDMI source and a reference HDMI sink interface allowing you to test audio, video and HDMI protocols—HDCP, EDID, CEC & infoframes—of any type of HDMI device: sources, repeaters and sinks. The 780AH supports testing at pixel rates up to 300 MHz for testing 4K Ultra HD HDMI 2.0 devices at 50/60Hz using 4:2:0 pixel encoding on sources and sinks. The instrument supports testing HDCP versions 1.4 and 2.2 on both sources and sinks.
  • 780BH Video Generator / Analyzer. The 780BH Video Generator / Analyzer is a battery-powered, portable video test instrument that enable you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780BH supports all the features of the 780AH including 300MHz on the HDMI Tx and Rx ports for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz, but adds a larger screen (7 inches) for greater convenience in viewing analysis test results as well as a status bar on the bottom of the display for at-a-glance status on the HDMI Tx and Rx ports. The instrument supports testing of HDMI 2.0 devices including tests for 4:2:0 pixel encoding on sources and sinks, EDID emulation for testing HDMI 2.0 sources and distribution devices and tests HDMI 2.0 sinks with 21:9 formats. The instrument supports testing HDCP versions 1.4 and 2.2 on both sources and sinks.
  • 780C Multi-Interface Interoperability Tester. The 780C Multi-Interface Interoperability Tester is a handheld digital video generator and analyzer that enables you to run tests on various digital video devices and network distribution devices on site or in the R&D lab. The 780C instrument provides a 7 inch color touch screen for operation and for viewing status of outgoing and incoming video and audio. The 780C is equipped with multiple interface types including HDMI, HDBaseT, 3G-SDI and component analog. The HDMI and HDBaseT Tx and Rx ports operate at 300MHz for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz. Testing digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. Testing hybrid converter devices supporting 3G-SDI, HDMI, HDBaseT distribution networks is a key application of the 780C as well.
  • 780D HDMI Protocol Analyzer / Generator. The 780D 600MHz HDMI Protocol Analyzer / Generator for UHD Testing is a handheld digital video generator and analyzer that enables you to run tests on various digital video devices and network distribution devices on site or in the R&D lab. The 780D instrument provides a 7 inch color touch screen for operation and for viewing status of outgoing and incoming video and audio. The 780D is equipped with multiple interface types including HDMI, HDBaseT, and component analog. The HDMI Tx and Rx ports operate up to 600MHz for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz with 4:4:4 pixel encoding. The HDBaseT Tx and Rx ports operate at 300MHz for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz with 4:2:0 pixel encoding. Testing digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. Testing hybrid converter devices supporting HDMI, HDBaseT distribution networks is a key application of the 780D as well. The 780D supports HDCP 2.2 authentication testing on  its HDMI Tx and Rx ports.
  • 780E Multi-Protocol Analyzer / Generator. The 780E Multi-Protocol Analyzer / Generator for for HDMI, DisplayPort and HDBaseT, is a handheld digital video generator and analyzer that enables you to run tests on various digital video devices and network distribution devices on site or in the R&D lab. The 780E instrument provides a 7 inch color touch screen for operation and for viewing status of outgoing and incoming video and audio. The 780E is equipped with multiple interface types including HDMI, DisplayPort and HDBaseT. The HDMI Tx and Rx ports operate up to 600MHz for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz with 4:4:4 pixel encoding. The HDBaseT Tx and Rx ports operate at 300MHz for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz with 4:2:0 pixel encoding. The DisplayPort Tx and Rx ports operate at link rates up to 5.4 Gb/s on 1, 2 or 4 lanes. Testing digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. Testing hybrid converter devices supporting HDMI, DisplayPort and HDBaseT distribution networks is a key application of the 780E as well. The 780E supports HDCP 2.2 authentication testing on both its HDMI and DisplayPort Tx and Rx ports.
  • 701A Video Generator. Offers testing of DVI single link displays as well as RGB analog, component analog and composite video.

 

 

The Teledyne LeCroy quantumdata family of products provide a variety of solutions for testing in the manufacturing environment. The following products are available to manufacturing in production facilities. Visit the Manufacturing Solutions page for more detailed information.

  • 980R Test Platform. The 980R platform is a modular based system that can accommodate up to five (5) 980 series modules. The 980R size and rack mounting capabilities make it ideal for use in manufacturing environments for testing HD and UltraHD TVs using the 980 series video generator modules. The 980R Test Platform and its modules can be controlled either through the PC-based 980 GUI Manager or through the embedded 980 GUI Manager running on the 980R platform itself. The 980R Test Platform’s built-in color touch screen provides a graphical user interface (GUI) to control the instrument.
  • 804 Video Generator. The rack mountable 804 Video Generator is optimized for testing modern HDMI flat panel TVs. The 804 video test generator supports testing of HDMI resolutions operating up to 225MHz. The 804 is equipped with four (4) HDMI outputs—all active simultaneously—for testing HDTVs with multiple HDMI inputs.
  • 804A Video Generator. The rack mountable 804A Video Generator is optimized for testing modern HDMI 2.0 flat panel TVs. The 804A video test generator supports testing of HDMI resolutions operating up to 300MHz. This enables testing ultra HD TVs with 4K resolutions at 50/60Hz with either 4:2:0 or 4:4:4 pixel encoding. The 804A also support testing with HDMI 2.0 21:9 format resolutions up to 300MHz. Like the 804, the 804A is equipped with four (4) HDMI outputs—all active simultaneously—for testing HDTVs with multiple HDMI inputs.
  • 804B Video Generator. The 804B Video Generator supports testing of 4K Ultra HD TVs up to 600MHz pixel rate. Tests HDMI 2.0 devices at 50/60Hz with 4:4:4 pixel encoding on sinks. Supports testing of HDMI 2.0 EDIDs on sink devices. The instrument also enables verification of HDCP 2.2 authentication with an HDMI 2.0 4K UHD TV at 600MHz.
  • 802BT Video Generator. Supports HDMI testing at pixel rates up to 165 MHz and analog composite and component outputs.
  • 802R Video Generator. Offers testing of HDMI up to 165 MHz or DVI single link or dual link testing. The analog component output provides 300 or 400 MHz pixel rate outputs.
  • 881E-HDMI Video Generator. The 881E Video Generator is well suited for your manufacturing environment whether testing HDMI or analog interfaces. The HDMI transmitter supports advanced features such as 12-bit/component deep color and HDMI 3D and operates up to 225 MHz TMDS rate. The instrument is also equipped with 250 MHz analog output and composite analog for NTSC and PAL testing.
  • 881D Video Generator. The 881D Video Generators are well suited for your manufacturing environment whether testing HDMI, dual link DVI, high speed analog displays (up to 400 MHz) or composite analog output. The 881D test instrument is equipped with automation features and pattern generation functions necessary for manufacturing. The 881D can optionally be equipped with a single link SDI output.

The Teledyne LeCroy quantumdata family of products provide solutions for testing for military applications. The following products are available to military applications. Visit the Military Solutions page for more detailed information and additional test instruments for military applications.

  • 802BT Video Generator. Supports HDMI testing at pixel rates up to 165 MHz and analog composite and component outputs.
  • 802BT-CASS Video Generator. The 802BT-CASS test instrument provides the necessary video outputs resolutions and test patterns for the CASS program.
  • 802R Video Generator. The 802R Video Generator offers testing of HDMI up to 165 MHz or DVI single link or dual link testing. The analog component output provides 300 or 400 MHz pixel rate outputs.
  • 882D Video Generator. The 882D Video Generator is well suited for your manufacturing environment whether testing HDMI, dual link DVI, high speed analog displays (up to 400 MHz) or composite analog output. The 882D test instrument is equipped with automation features and pattern generation functions necessary for manufacturing. The 882D can optionally be equipped with a single link SDI output.
  • 701A Video Generator. The 701A Video Generator offers testing of DVI single link displays as well as RGB analog, component analog and composite video.

The Teledyne LeCroy quantumdata family of products provide a variety of solutions for testing for broadcast applications. The following products are available to broadcast applications. Visit the Broadcast Solutions page for more detailed information.

  • 780C Multi-Interface Interoperability Tester. The780C Multi-Interface Interoperability Tester for Video and Audio is a handheld digital video generator and analyzer that enables you to run tests on various digital video devices for broadcast environments either on-site or in the R&D lab. The 780C instrument provides a 7 inch color touch screen for operation and for viewing status of outgoing and incoming video and audio. The 780C is equipped with multiple interface types including HDMI, HDBaseT, 3G-SDI and component analog. Testing digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. Testing hybrid converter devices supporting 3G-SDI, HDMI, HDBaseT distribution networks is a key application of the 780C as well.
  • 980 12G-SDI Video Generator module. The 980 12G-SDI Video Generator module supports video and audio functional testing of next gen broadcast monitors and conversion devices up to 12G-SDI. The module is equipped with four (4)12G-SDI-capable output ports. The output ports can aggregated for dual link and quad link operation. Dual link and Quad link HD as well as Dual link and Quad link 3G are supported. A gen-lock input supporting both SD analog black burst and HD tri-level to sync the output clocks with a "house sync." The module provides a programmable audio sine wave generator supporting 2 channel through 12 channel LPCM audio.
  • 882D Video Generator. The 88D Video Generator is well suited for your manufacturing environment whether testing HDMI, dual link DVI, high speed analog displays (up to 400 MHz) or composite analog output. The 882D test instrument is equipped with automation features and pattern generation functions necessary for manufacturing. The 882D can optionally be equipped with a single link SDI output.
  • 701A Video Generator. Offers testing of DVI single link displays as well as RGB analog, component analog and composite video.

 

 

Solutions Links

 

R&D Solutions

Compliance Solutions

Installation Solutions

Manufacturing Solutions

Military Solutions

Broadcast Solutions

V

TOP