R&D Solutions

Home » Solutions » R&D Solutions

R&D Solutions News

Teledyne LeCroy quantumdata announces industry first HDMI 2.1 Protocol Analyzer Module supporting 48Gbps analysis

Teledyne LeCroy quantumdata announces release of 980 DispalyPort 1.4 Video Generator / Analyzer module supporting testing at HBR3 bit rates of 8.1Gbps

Teledyne LeCroy announces release of 980 series SDI Video Generator module

Quantum Data announces 780E Multi-Protocol Analyzer / Generator for HDMI, DisplayPotrt and HDBaseT

Quantum Data Adds Basic Analyzer on DisplayPort 1.2 Video Generator Module

Quantum Data 980 HDMI Protocol Analyzer now supports HDMI-HDCP 2.2 Functional Testing

Quantum Data Announces 780B Video Generator/ Analyzer for HDMI

Quantum Data Announces 780A Handheld Test Instrument for HDMI

Quantum Data Announces New 5-Module 980 Series Platform

Quantum Data Announces Model 804A Video Test Generator Operating at HDMI® 1.4 speeds of 297MHz

Quantum Data Adds DisplayPort v1.1 Support to 882E Video Test Instrument Lineup

Teledyne LeCroy offers a wide variety of products for engineers in the R&D lab. R&D testing entails functional testing for source and sink devices as well as interoperability testing for diagnosing problems between A/V devices. Solutions for silicon chip manufactures are available for both source and sink devices. Quantum Data solutions are available for testing HDMI, MHL, DisplayPort, HDBaseT and 3G-SDI products.

View the 980 Product Selection Guide for a comparison of the features and functions supported by each 980 module.

View the 980 Product Presentation for details on the features and functions supported by each 980 module.

 

GET QUOTE

 

HDMI R&D

DP R&D

HD BaseT R&D

SDI R&D

            Modelssss5

The Teledyne LeCroy quantumdata family of products provide a variety of solutions for testing HDMI devices and products in R&D development lab environment. The following is a summary of products that provide functional and interoperability test solutions for HDMI.

  • NEW! 980 48G Protocol Analyzer / Generator module for HDMI Testing. The 980 48G Protocol Analyzer / Generator module for HDMI Testing provides the deep analysis test features necessary to test the development of your HDMI 2.1 source device at data rates up to 48Gbps. Deep analysis enables you to identify and resolve interoperability problems early in the product life cycle. The module also supports video generation of FRL streams to test FRL-capable displays. The video generator enables you to run functional tests on FRL-capable display devices by rendering uncompressed, unencrypted FRL streams at up to 8K video resolutions at lane rates up to 12Gb/s and at an aggregate link rate of 48Gb/s. The initial phase of the video generator function is implemented through a playback function which uses pre-captured FRL streams. The enhanced full video generator function for TMDS and FRL supports free selection of specific video formats (including 8K), colorimetry, bit depth, chroma subsampling and test patterns. Fixed Rate Link (FRL) source and sink compliance tests are also now supported.
  • 980 HDMI 18G Video Generator module for HDMI Testing. The 980 18G Video Generator module for HDMI Testing supports video and audio and protocol functional testing of HDMI 2.0 sink devices at TMDS characters rates up to 600MHz for testing ultra high definition HDTVs with 4K x 2K resolutions running at 50/60Hz. The 980 HDMI 2.0 Video Generator module also supports industry approved compliance testing for next generation UHD TVs. The module supports HDMI Forum-approved compliance testing for HDMI 2.0 sink tests at pixel rates up to 600MHz and UHD Alliance compliance testing for UHD TVs.
  • 980 HDMI 18G Protocol Analyzer / Generator module for HDMI Testing. The 980 18G Protocol Analyzer / Generator module for HDMI Testing supports deep analysis and compliance testing of HDMI 2.0 streams up to 600MHz. The module also supports HDMI 2.0 compliance testing for source devices and UHD Alliance compliance testing for ultra high definition sources. For HDMI the tool provides full visibility into the HDMI metadata, timing data, video data, control and auxiliary data up to 600MHz (HDMI) which supports testing of HDMI 2.0 4K Ultra HD sources at 50/60Hz. The module is also equipped with an HDMI 2.0 transmitter port for testing sink devices. Currently the transmitter port functions are limited and provide only pass-through monitoring of an HDMI 2.0 video stream between a source and sink, pixel error testing of cables and distribution gear or entire distribution networks in loopback mode and capture and playback where an input stream can be captured, stored and then played back.
  • 780 series Handheld Test Instruments. The 780 series handheld test instruments for HDMI® are battery-powered (except 780C, 780D and 780E), portable video and audio generators and HDMI analyzers that offer a rich variety of functional tests for development engineers and test engineers in the R&D environment. The 780 series instruments are equipped with both a reference HDMI source and a reference HDMI sink interface allowing you to test audio, video and HDMI protocols—HDCP, EDID, CEC & infoframes—of any type of HDMI device: sources, repeaters and sinks. Newest 780 models support testing up to 600MHz pixel rate with support for HDCP 2.2/2.3. Earlier models support testing up to 300MHz.
  • 804 Video Test Generators. The support HDMI testing at pixel rates ranging from 165 MHz and TMDS rates to 600MHz. The instruments provides RGB and component analog outputs as well as composite video. The 804 series instruments offer an extensive library of format timings and provide standard test patterns and protocol test images (EDID, HDCP, CEC) necessary for testing HDMI 1.4 and 2.0 HDTVs. The module and its functions can be controlled through the command line via USB or RS-232 for control from an automated test system (ATS).

 

 

 

 

 

The Teledyne LeCroy quantumdata family of products provide a variety of solutions for testing DisplayPort sinks and optionally sources in the R&D development lab environment. The following is a summary of products that provide functional and interoperability test solutions for DisplayPort.

The Teledyne LeCroy quantumdata family of products support HDBaseT testing for the R&D lab through the HDMI interface of its test instruments and the new 780C, 780D and 780D test instruments which are equipped with both an HDBaseT Tx port and an HDBaseT Rx port. The following products support functional testing and interoperability testing for HDBaseT products.

The following products support functional testing and interoperability testing for 3G-SDI products.

  • 780C Video Generator / Analyzer for HDMI, HDBaseT & 3G-SDI Testing. The 780C Video Generator / Protocol Analyzer for HDMI Testing is a handheld digital video generator and analyzer that enables you to run tests on various digital video devices and network distribution devices on site or in the R&D lab. The 780C instrument provides a 7 inch color touch screen for operation and for viewing status of outgoing and incoming video and audio. The 780C is equipped with multiple interface types including HDMI, HDBaseT, 3G-SDI and component analog. The HDMI and HDBaseT Tx and Rx ports operate at 300MHz for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz. Testing digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. Testing hybrid converter devices supporting 3G-SDI, HDMI, HDBaseT distribution networks is a key application of the 780C as well.
  • 980 SDI Video Generator module. The 980 SDI Video Generator module supports video and audio functional testing of next gen broadcast monitors and conversion devices up to 12G-SDI. The module is equipped with four (4) 12G-SDI-capable output ports. The output ports can aggregated for Dual link HD-SDI and Quad link 3G-SDI operation. A gen-lock input supporting both SD analog black burst and HD tri-level to sync the output clocks with a "house sync." The module provides a programmable audio sine wave generator supporting 2 channel through 12 channel LPCM audio.

V

TOP