980 HDMI Phy and Protocol Aux Channel Analyzer Module

Home » Products » 980 Series Test Instruments » 980 PACA

980 HDMI PACA

Resources

Documentation

980 PACA Data Sheet

The Teledyne LeCroy quantumdata 980 HDMI Phy & Protocol Aux Channel Analyzer module supports compliance testing of the HDMI DDC bus and HDMI 2.0 CEC testing (partial support only). The module’s CEC compliance tests enable you to identify compliance failures early in the development cycle. The solution is ideal for pre-testing and self-testing (where permitted) your HDMI 2.0 device. The module also supports compliance testing of the HDMI DDC bus voltage and timing parameters in accordance with HDMI 1.4b. Future releases of the module will support functional tests and compliance tests on other HDMI auxiliary channels.

The 980 HDMI Phy and Protocol Aux Channel Analyzer module can be equipped in the following Quantum Data 980 Advanced Test Platform.

Overview

Compliance

 

Specs

            Modelssss5

            Modelssss6

 

The quantumdata 980 Phy & Protocol Aux Channel Analyzer module’s DDC compliance tests enable you to identify compliance failures early in the development cycle. The solution is an ideal for pre-testing and self-testing (where permitted) your HDMI 1.4 source or sink device. Pre-testing and self-testing reduces cost of testing or retesting at an Authorized Test Center (ATC) and enables you to meet time to market requirements. You can save the results and distribute them to colleagues.

The 980 HDMI Phy and Protocol Aux Channel Analyzer module's tests can be controlled either through the PC-based 980 GUI Manager or through the embedded 980 GUI Manager running on the 980 platform itself. The 980's built-in color touch screen provides a graphical user interface (GUI) to control the module and run the compliance tests.

  • Pre-Testing your HDMI 1.4x source and sink devices. Pre-testing prior to submission to the ATC provides a high level of assurance that your HDMI product will pass. This reduces the cost and time of having to resubmit if a failure occurs.
  • Self-Testing HDMI 1.4x devices. Self-testing (where permitted) enables you to avoid submission to the ATC thereby eliminating cost and enabling you to get your HDMI 1.4x device to market more quickly.
  • Compliance Testing. Offers limited CEC 2.0 tests in Section 5 for Low Level 4-1, General Protocol 4-2 and Timing 4.3.
  • Operational Efficiency. Offers flexibility in running the tests by enabling you to select a small set of tests to run initially. You can save test configurations and recall them for later use to target specific compliance tests.
  • Root Cause Identification. When compliance test failures occur, you can view the details of the failure. This enables you to quickly identify the root cause of a compliance test failure.
  • Data Portability. Data portability enables you to share compliance test results with colleagues, subject matter experts at other corporate locations and other experts for analysis and for verifying compliance. The 980 test instrument is not required to view the test results. The data can be viewed through the 980 GUI Manager which is free and available from The Teledyne LeCroy quantumdata website.
  •  

The following are a list of key specifications for the DisplayPort 1.2 Video Generator module. Please refer to the data sheet for a complete list of specifications.

 

DislayPort Tx Interfaces (2)

 

  • Number of Lanes: 1, 2, 4.
  • Link Rates: 1.6Gb/s, 2.7Gb/s, 5.4Gb/s.
  • Video Encoding: RGB, YCbCr
  • Sampling modes: 4:4:4, 4:2:2.
  • Color Depth: 24, 30, 36, & 48 bits per pixel
  • Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.

 

(optional) DislayPort Rx Interface

 

  • Number of Lanes: 1, 2, 4.
  • Link Rates: 1.6Gb/s, 2.7Gb/s, 5.4Gb/s.
  • Video Encoding: RGB, YCbCr.
  • Sampling modes: 4:4:4, 4:2:2.
  • Color Depth: 24, 30, 36, & 48 bits per pixel.
  • Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.

The following is a list of some of important specifications of the 980 HDMI 2.0 Protocol Analyzer module. Please refer to the 980 HDMI 2.0 Protocol Analyzer Data Sheet for a list of all features, benefits, options and specifications.

 

Interfaces

 

  • HDMI Rx Max TMDS Character rate: Up to 600MHz.
  • HDMI Rx Video Encoding/Sampling modes: RGB, YCbCr 4:4:4, 4:2:2, 4:2:0.
  • HDMI Rx Color Depth: 24/30/36 bit color.
  • HDMI Rx Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.
  • HDMI Rx Audio Formats: LPCM, Dolby (DD, DD+, TrueHD); DTS (ES, HD, Master Audio).
  • HDMI Rx Capture memory: 4 GBytes.
  • HEAC HDMI Ethernet Channel and Audio Return Channel Connector: RJ-45.

 

 

V

TOP