701A Video Generator

Home » Products » 701A Video Generator

Important Note: This product has been discontinued.

If you’re testing digital or analog computer monitors, video projectors, multimedia monitors, or TVs, the 701A Video Test Generators provides the signals, test patterns, and audio to do your job, easily and accurately. Field technicians and factory people on the move will appreciate the convenience of battery power and small size. The 701A Video Test Generator is designed to go where you go.

Overview

Features

Options

Specs

            Modelssss4

            Modelssss5

            Modelssss6

If you’re testing digital or analog computer monitors, video projectors, multimedia monitors, broadcast displays or TVs, the 701A Video Test Generators provides the signals, test patterns, and audio to do your job, easily and accurately. Field technicians and factory people on the move will appreciate the convenience of battery power and small size. The 701A is designed to go where you go.

 

 

The following is a list of some of key the 701A standard features and benefits. Please refer to the 701A Data Sheet for a list of all features and benefits.

Analog and digital video signals – Output VESA, NTSC, PAL, HDTV, DVI, and RF video signals. Use included DVI-to-VGA adaptor for analog output from DVI-I connector.

Custom formats – Create your own video formats.

Compact size – The 701A are truly handhelds.

Battery operation – Use rechargeable batteries or AC power.

Service Center patterns – The patterns used by most service centers are built-in.

Learn monitor – Read the supported formats from the monitor, without guessing formats.

Built-in audio – Test audio channels of video projectors and multimedia monitors.

Intuitive user interface – Easy to navigate drill-down menus.

Custom test sequence – Define sequences of images and video formats for repetitive testing.

 

 

The following is a list of the 701A optional features:

SDI/HD-SDI – Enables you to calibrate and run functional tests on SDI and HD-SDI displays and reference monitors.

HDCP authentication – Enables you test your DVI (and HDMI) displays for HDCP compliance.

 

The following is a list of some of important specifications of the 701A. Please refer to the 701A Data Sheet for a list of all specifications.

Interfaces

  • DVI Tx – Connector: DVI-I Dual Link; Pixel rate: Up to 85 MHz. Video Type/Sampling: RGB 4:4:4, 24 bit color; Colorimetry: ITU-R BT.601-5.
  • Analog Component Tx – Connector: DVI-I; Pixel rate: Up to 148.5 MHz; Video Type/Sampling: RGB/YPbPr 4:4:4.
  • Analog Composite Tx – Connectors: BNC (CVBS), Mini DIN-4 (S-Video); Pixel rate: up to 14.75kHz. Provides NTSC and PAL video.
  • SDI/HD-SDI Tx (optional) – Connectors: BNC (75 ohm); Bit rate: up to 1.485 Gb/s; Video Type/Sampling: YCbCr 4:2:2.

Operation

  • LCD screen with associated buttons –  Screen size: 20 x 4 character.
  • RS-232C – Serial command line to copy formats and perform firmware updates.

Physical

  • Power (Battery) – DC 6AA NiMh batteries; 8 hours battery life on 8 hour charge.
  • Power (AC) – VAC 100 to 240VAC (auto-select); Frequency: 50 – 60Hz.
  • Dimensions – Height 6.0 inches (15.24 cm); Width: 8.25 inches (20.95 cm); Depth: 2 inches (5.08 cm).
  • Weight – 3.5 LBS (1.59 Kg).
  • Environmental – Humidity: 30% – 80% RH non-condensing; Operating Temp: 32 – 104 F (0 – 40 C).

 

 

701A Resources

 

Data Sheet

 

701A Data Sheet

User Guide

 

701A User Guide

V

TOP